Tech Tips
SOLIDWORKS Tech Tip – Using a 360 Camera to Create Custom HDRs
Learn how to use a 360 camera to create custom lighting environments.
... ContinuedAdvanced SOLIDWORKS Electrical BOM Customization
Anyone who has been in the industry long enough, knows how important Bill of Materials (BOM) really are. When it comes to customization of the table, not many software applications out there give you the freedom to set it up
... ContinuedSOLIDWORKS Tech Tip – How a CG Artist Uses Visualize and Photoshop
Learn how a CG artist uses Visualize and Photoshop to produce marketing-ready images.
... ContinuedHow Strong is Your LEGO® Piece Really? Find Out With SOLIDWORKS Simulation
Growing up and playing with LEGO® as a budding engineer, had you ever thought about how strong your LEGO® pieces were? We shall investigate this thought using SolidWorks Simulation, an FEA module that runs natively within the SolidWorks User Interface.
... ContinuedSOLIDWORKS Tech Tip – Sunlight Environments Part 1
Learn how to use the Sunlight Environment and set up your scene using this photorealistic lighting tool.
... ContinuedBest selection of sketch projection tools in SOLIDWORKS
There are 3 main tools that can project our 2D sketch onto a face: Project curve, Split line and Wrap. How should we choose and what is the difference between them? Here are some tips for you. Project curve –
... ContinuedSOLIDWORKS Command, Delete Face: Easily Remove Faces From a Solid or Surface Body
Learn how to easily delete a face from a solid or surface body when modeling in SOLIDWORKS. Our #TechTip this week is by Training Manager John Setzer. Video Transcript Hi and welcome to another GSC tech tip. Today we’re going
... ContinuedDrop Out Bowl Mould
This is a SOLIDWORKS Tutorial for a drop out bowl mold. The mold is designed to create a slip cast ceramic bowl. The tutorial focuses on the combine tool, and the use of undercut analysis, which evaluates the design of the bowl for possible issues for molding. It is essential to test a model in this way before molding to avoid the model getting trapped in the mold.
... ContinuedPot of Gold Money Jar Tutorial
This is a SOLIDWORKS tutorial to create a pot of gold money jar. This tutorial demonstrates a range of modelling tools, but also highlights the use of the centreline sketch tool as a guide for sketches, new planes, and axis for pattern or move features. The decals and coin part for this design are available to download in the tutorials blog description.
... ContinuedHow to Reference a Cross-Section within SOLIDWORKS
What if you needed to pull a cross-section of a solid with the ability to trace it? Well there are a couple of ways you can go about doing just that. The first is the Slicing tool which first made
... Continued