part reviewer
SOLIDWORKS Part Reviewer: Kick-Ass Turtle Tutorial
Kick-Ass Turtle: This fun multi-body part has two configurations, one with a smile and one with a scowl. It also has four display states for four different color masks. With the two configurations and four display states this gives you eight
... ContinuedSOLIDWORKS Part Reviewer: Simple Sheet Metal Part 4 Tutorial
Simple Sheet Metal Part 4: Start off with flat plate and then add edge flanges. Sheetmetal features are used so that the part can be flattened out to create a flat pattern. Modified sketch to include large rectangular cutout
... ContinuedSOLIDWORKS Part Reviewer: CNC Wooden Dinosaur Puzzle Tutorial
CNC Wooden Dinosaur Puzzle: This fun multi-body part shows some basic but powerful and efficient surfacing techniques. This part was designed for use in a CNC Cutter (e.g. Laser Cutter) using a material such as Wood, Plastic, Cardboard, etc. The main
... ContinuedSOLIDWORKS Part Reviewer: Pillow Shape Tutorial
Pillow Shape: A curvature continuous fillet is based on a spline, not an arc, which results in a more cosmetic pleasing round that better reflects light. A revolved surface is created to act as the very top of the pillow
... ContinuedSOLIDWORKS Part Reviewer: Moderate Sheet Metal Part Five Tutorial
Moderate Sheet Metal Part Five: This part is created using sheet metal features so that the part can be flattened out to create a flat pattern. The first feature is a flat plate where the side flanges will be added throughout
... ContinuedSOLIDWORKS Part Reviewer: Simple Surface Part 5 Tutorial
Simple Surface Part Five: This door handle is an example of a part created without using any solid body features.A few of the initial features could have been created using standard solid features such as an Extruded or Revolved Boss/Bases.The Boundary
... ContinuedSOLIDWORKS Part Reviewer: Complex Sheet Metal Part 4 Tutorial
Complex Sheet Metal Part 4: This feature distinguishes that this is sheet metal part. It specifies the bend radius, wall thickness and K factor. Sheet metal features are used so that the part can be flattened out to create a flat
... ContinuedSOLIDWORKS Part Reviewer: Seymour Tutorial
Seymour: The body was created by sketching a circle and using the Extrude command along with a draft. A logo was attached to the front of the body with the decal appearance tool. A plane was created to use to sketch
... ContinuedSOLIDWORKS Part Reviewer: Stand Tutorial
Stand: This Split Line uses overlapping contours within the sketch to create two faces which will be used as profiles in the ‘Pod’ Loft. When unsuppressed, this Shell demonstrates a serious Shell error. If Verification on Rebuild is active, the
... ContinuedSOLIDWORKS Part Reviewer: Complex Machine Part 6 Tutorial
Complex Machine Part 6: This is a machined part that has extruded features, some revolved features, and some special cuts that include swept cuts and a boundary cut. Offset entities are used which allows for the cut wall geometry to
... Continued