meshing
Compatible or Incompatible – Your guide to meshing bonded contacts
Setting up your simulations is a straight forward process made up of just a handful of steps like defining your materials, loads, and fixtures – capturing the real-world environment as closely as possible. And before you can move on to
... ContinuedTroubleshoot Meshing with SOLIDWORKS Geometry Analysis Tool
One of the most frustrating parts of the Finite Element Analysis (FEA) world is when a geometry won’t mesh no matter what you do. What’s even more frustrating is when you don’t know what to do about it! Luckily, I’ve found
... ContinuedSOLIDWORKS Simulation Vs. SimulationXpress
Every version of SOLIDWORKS contains SimulationXpress capability to carry out first pass stress analysis on your parts. If you are lucky enough to have SOLIDWORKS Premium, then you also get the linear static analysis simulation add-in. In addition to this,
... ContinuedIs This a Good FEA Mesh? Here’s How to Answer Yes, No, and All-You-Need-to-Know About Meshing Infographic
Meshing a model is an integral step in performing any simulation. There’s no getting around it – it has to be done. Thanks to many improvements over the years, meshing has transformed from a very tedious, manual process into a
... Continued