mold
Pumpkin Tealight Holder: SOLIDWORKS Tutorial Part 2
Moving onto the making side of this tutorial, I put my SOLIDWORKS mold test model to use from Part 1 of this tutorial. I will walk you through the making of the mold from start to finish, I have included a
... ContinuedPumpkin Tealight Holder: SOLIDWORKS Tutorial Part 1
For this tutorial, I wanted to use some of my ceramics knowledge to design a make a Pumpkin shaped tealight holder. To do this, I’ve split my tutorial into two parts. Part 1 will demonstrate how to design and model
... Continued4 Part Plaster Mold Tutorial
This is a SOLIDWORKS Tutorial to create a 4 Part Plaster Mold. Follow the tutorial to see how to use the split tool and combine to create a complex 4 piece mold of a beaker design. The beaker mold model needed for the tutorial is available from the blog below.
... ContinuedSOLIDWORKS Part Reviewer: Waffle Iron Tutorial
Waffle Iron: This model shows a few of the mold tool features available in SOLIDWORKS. In this case the waffle iron is made from reversing the waffle geometry. The multi-body part has some simple sheet metal features along with standard features.
... ContinuedSOLIDWORKS Part Reviewer: Sand Castle Bucket Part 2 Tutorial
Sand Castle Bucket Part 2: In continuation of our first summer post last Saturday, here is the second Sand castle Bucket in the 2-part series. The sand castle bucket demonstrates the usefulness of a layout sketch to control features. Since the
... ContinuedSOLIDWORKS Part Reviewer: Sand Castle Bucket Part 1 Tutorial
Sand Castle Bucket Part 1: Since today is the first official day of summer, I am celebrating by posting a 2-part sand castle bucket set this week. The sand castle bucket demonstrates the usefulness of a layout sketch to control features.
... Continued