Menu
  • SOLIDWORKS Blog
  • Education Blog
  • Tech Blog
  • International Blogs
    • SOLIDWORKS Brazil
    • SOLIDWORKS France
    • SOLIDWORKS France Education
    • SOLIDWORKS Germany
    • SOLIDWORKS Japan
    • SOLIDWORKS LATAM y España
  • Podcast
SOLIDWORKS Tech Blog

part reviewer

SOLIDWORKS Part Reviewer: Honeycomb Foil Ornament

By SOLIDWORKS December 19, 2020
Share this...
Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Share on LinkedIn
Linkedin
SOLIDWORKS Part Reviewer: Honeycomb Foil Ornament

Honeycomb Foil Ornament: This is a foil or paper honeycomb ornament. A little computer intensive due to its large patterns, but worth the wait. This model uses boundary surfaces to create a diamond shape. That diamond is then patterned in two

... Continued

SOLIDWORKS Part Reviewer: Partridge in A Pear Tree

By SOLIDWORKS December 12, 2020
Share this...
Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Share on LinkedIn
Linkedin
SOLIDWORKS Part Reviewer: Partridge in A Pear Tree

Partridge in a Pear Tree: This fun part has two configurations showing the collapsed and open states of the geometry. The geometry in this part acts similar to a pop up greeting card. One angle dimension in the base sketch controls

... Continued

SOLIDWORKS Part Reviewer: Rocking Horse

By SOLIDWORKS November 28, 2020
Share this...
Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Share on LinkedIn
Linkedin
SOLIDWORKS Part Reviewer: Rocking Horse

Rocking Horse: A toy Rocking Horse that can be scaled up or down to be used in renderings or as a 3D printed figurine, an ornament, etc. You can download the part here.  Complexity: Moderate Features: Layout Sketch, Offset Surface, Delete/Keep

... Continued

SOLIDWORKS Part Reviewer: Cubic Trefoil Knot

By SOLIDWORKS November 14, 2020
Share this...
Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Share on LinkedIn
Linkedin
SOLIDWORKS Part Reviewer: Cubic Trefoil Knot

Cubic Trefoil Knot: This model demonstrates a different technique for creating a weldment without using a 3D sketch or a collection of 2D sketches. This multi-body part is called a Cubic Trefoil Knot. It is a 3D-golygon (knotted golygon).  Instead

... Continued

SOLIDWORKS Part Reviewer: Chandelier

By SOLIDWORKS September 19, 2020
Share this...
Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Share on LinkedIn
Linkedin
SOLIDWORKS Part Reviewer: Chandelier

Chandelier: If you like bling and contemporary decorating you will enjoy this pendent. In this part, modeled in SOLIDWORKS 2020, a helical wrapped oval shape is created by hot dog shaped links.  The external shape is created using an oval and

... Continued

SOLIDWORKS Part Reviewer: Candlestick Phone

By SOLIDWORKS September 5, 2020
Share this...
Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Share on LinkedIn
Linkedin
SOLIDWORKS Part Reviewer: Candlestick Phone

Candlestick Phone: This model is a multi-body part that uses Sketch Pictures to help guide the creation of several revolved and extruded features. The techniques shown here are the same that can be used to create 3D geometry from a

... Continued

SOLIDWORKS Part Reviewer: Spring Dog

By SOLIDWORKS July 25, 2020
Share this...
Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Share on LinkedIn
Linkedin
SOLIDWORKS Part Reviewer: Spring Dog

Spring Dog: New to SOLIDWORKS 2020 is a unique component that acts “flexible” in an assembly and each instance of the component can take on a different shape. Think of a flexible hose, cable, or spring that the same flexible

... Continued

SOLIDWORKS Part Reviewer: Keg

By SOLIDWORKS July 11, 2020
Share this...
Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Share on LinkedIn
Linkedin
SOLIDWORKS Part Reviewer: Keg

This is a wooden beer keg complete with staves, heads, hoops, bung holes and a spigot. The Intersect command is used to help create the barrel shaped using surfaces as the cutting tool. This part implements the use of shared sketches

... Continued

SOLIDWORKS Part Reviewer: Variable Pattern Rocky Lighthouse

By SOLIDWORKS June 27, 2020
Share this...
Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Share on LinkedIn
Linkedin
SOLIDWORKS Part Reviewer: Variable Pattern Rocky Lighthouse

Variable Pattern Rocky Lighthouse: This model is intended to demonstrate the power of the Variable Pattern feature. A rocky landscape is created by patterning a Rock feature. By utilizing Variable Pattern, the dimensions within the Rock sketch are driven by

... Continued

SOLIDWORKS Part Reviewer: Wooden Truck

By SOLIDWORKS June 13, 2020
Share this...
Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Share on LinkedIn
Linkedin
SOLIDWORKS Part Reviewer: Wooden Truck

Wooden Truck: This is a simple wooden toy truck utilizing lots of shared contour sketches with extrudes and revolves. “Offset” from Sketch Plane and the “Vertex” offset are used to create multiple pieces by reusing multi-contour sketches. Shared sketches for

... Continued
  • See older posts
SOLIDWORKS Cloud Quiz

Search

Recent Posts

  • Create Your Own Flexible Component (Part 3) : Advance Flexible Component
  • SOLIDWORKS Support Monthly News – April 2021
  • How to fix Empty SOLIDWORKS Drawing Views
  • Rocking Carousel Horse Tutorial
  • Understanding 2D Cabinet Layouts in SOLIDWORKS Electrical – Part 1

Recent Comments

  • Keith Hekman on Engineering Love with SOLIDWORKS Motion
  • Will Hughes on How to get FREE Access to SOLIDWORKS as a Student
  • Mark on Creating a Testing Vault for SOLIDWORKS PDM
  • Kaiming Ai on How to create a wind turbine blade using Surface Lofts
  • FlowJoe on Is This a Good FEA Mesh? Here’s How to Answer Yes, No, and All-You-Need-to-Know About Meshing Infographic

Archives