machine
SOLIDWORKS Part Reviewer: Moderate Machine Part 6 Tutorial
Moderate Machine Part 6: This is a machined part that has mostly extruded features with a few revolved features and one lofted cut. This part is symmetric mostly symmetric about the Front and Right Planes with exception of the side
... ContinuedSOLIDWORKS Part Reviewer: Complex Machine Part 4
Complex Machine Part 4: This is a machined part that has extruded features, some revolved features, and some special cuts that include boundary and sweep cuts. This part is an example of a multibody solid. It has 14 different bodies which could
... ContinuedSOLIDWORKS Part Reviewer: Simple Machine Part 4 Tutorial
Simple Machine Part 4: This part is made using extruded features with some hole wizard holes. Cutout fillets are used to add materials instead of removing the material. The Mirror tool is used to save time by creating one half of
... ContinuedSOLIDWORKS Part Reviewer: Complex Machine Part 3 Tutorial
Complex Machine Part 3: This is a machined part that has mostly extruded features with a few revolved features, a boundary cut and swept cut. All part features are symmetric about the Front Plane with the exception of the swept
... ContinuedSOLIDWORKS Part Reviewer: Moderate Machine Part 3 Tutorial
Moderate Machine Part 3: This part is created by using mostly extruded features with some revolves and one lofted cut. The use of convert entities allows for the perimeter wall geometry to update automatically if there are design changes of
... ContinuedSOLIDWORKS Part Reviewer: Moderate Machine Part 3 Tutorial
Moderate Machine Part 3: This part uses the rect layout sketch which is shared between multiple features. Download the part below to learn the techniques needed to create this part. This is part three in a six part series. Take a look
... ContinuedSOLIDWORKS Part Reviewer: Moderate Machine Part 2 Tutorial
Moderate Machine Part 2: This is a machined part that has mostly revolved features with some extruded features and a lofted cut. During the design process you will use convert entities. It creates an “On edge” relation that will update correctly
... Continued