SOLIDWORKS 2015
Using Assembly Layout Sketches
Using Assembly Layout Sketches Posted by David Brown Layout sketches in an assembly are typically used for top down assembly modeling. An example of this can be seen in this image of an assembly that contains a layout sketch with
... ContinuedUsing the Note Feature to Combine Drawing Dimensions
Let’s examine the process of combining dimensions into notes using the SOLIDWORKS Note feature: When working in a SOLIDWORKS and using the command INSERT > ANNOTATIONS > NOTE, you have the ability to add 1 or more dimensions to this note
... ContinuedConfiguring SOLIDWORKS for new Templates
Once Templates have been created, SOLIDWORKS has to be set up so they work correctly. The first thing to do is choose a location where you want these to be stored. It is advisable to choose a location which all
... ContinuedAdvanced Sweep Feature Techniques in SOLIDWORKS
If you have been paying attention to my blogs (it’s okay if you haven’t), you’ll recall that I wrote an article on the basics of creating a sweep in SOLIDWORKS. Since I’m sure you’ve mastered this, let’s move on to some
... Continued