cad
Reel Mower
This is a reel mower that I made. Take a look at the gearing on the wheels. The gear ratio is 1:3 which means that for every one rotation of the wheel the blades spins three times. I used a
... ContinuedW16 Engine: The Cylinder Head (Part 3)
In this final post about the Cylinder Head of the W16 engine I will “repair” the part I made thus far and also adapt it for the right side of the engine.
See detailed explanations in the extended entry at the end of the post.
Download the finished Left and Right Cylinder Ceads.
You can find the previous part of this post here.
Thank you for reading about this build and stay tuned for the next post which will detail the build of the components that go inside the cylinder head and the mates used to connect and make them move.
George Bucsan
Worcester Polytechnic Institute
Aerospace Engineering, 2014
... ContinuedW16 Engine: The Cylinder Head (Part 2)
In this post about the W16 Engine I will continue describing the cylinder head’s build up until the point I initially thought it is ready, but then realized it is flipped upside down.
You can find the first part of this post here.
Download the part file.
See detailed explanations in the extended entry at the end of the post.
Thank you for reading about this build and stay tuned for the next post which will continue the with the cylinder head’s „repair” and conversion for the right side of the engine.
George Bucsan
Worcester Polytechnic Institute
Aerospace Engineering, 2014
... Continued
W16 Engine: The Cylinder Head (Part 1)
In this post about the W16 Engine I will start describing the cylinder head and how it works. Then I’ll start detailing the build as usually.
The file: Download Camcase Left.
See detailed explanations in the extended entry at the end of the post.
Thank you for reading about this build and stay tuned for the next post which will continue the build of the cylinder head.
George Bucsan
Worcester Polytechnic Institute
Aerospace Engineering, 2014
... ContinuedAmerican Society of Civil Engineers (ASCE) 2011 Concrete Canoe Competition
Thank you to the University of Evansville for hosting this year's 2011 ASCE Concrete Canoe Competition. SolidWorks was used not only in the 3D computer aided design but also in finite element analysis and fluid flow analysis. The competition featured finalist from around
... ContinuedSolidWorks Sustainable Engineering Design Contest for Students
June is the month to participate in the SolidWorks Sustainable Engineering Green Design Contest. There are great student prizes. More information can be found below. Marie. https://blogs.solidworks.com/solidworksblog/2011/06/green-design-contest-in-full-swing.html
... ContinuedLight Bulb in SolidWorks
I was wondering what to make when I had a bright idea. Why don’t I make something that helps everyone see every day? Sooo, I decided to make a light bulb. The hardest thing to make was the filament because
... ContinuedLaurentian University Students win NASA’s Lunabotics Competition with SolidWorks
Congratulations to Laurentian University students in Sudbury, Ontario, Canada, have won NASA's Lunabotics competition. This eight member student team of 4th year mechanical engineering students won NASA's prestigious competition, where students design remote controlled excavators to dig, collect and deposit as much "lunar" material as
... ContinuedTen80 Student Racing Challenge, Hydrogen Fuel Cell Car with SolidWorks
My partners and I at Ten80 Education, like most of you, are wrapping up the school year and preparing for summer camps and clubs. I want to share with you some of the projects students have worked on in 2011-12
... ContinuedEngineering Education Tour of Ireland with t4
On the last day of my trip to Ireland, I observed the interaction between educators in Ireland’s t4 and Rwanda, I can only look to a great future as t4 has agreed to assist Rwanda in implementing their engineering and
... ContinuedMotor W16: Prima Animatie
The English posting of this blog is located here.
In acest post despre motorul W16 voi crea un ansamblu partial si voi face componentele deja prezente sa arate si sa se miste ca un motor real. Ca de obicei, aceasta constructie va fi foarte detaliata.
Explicatiile detaliate despre constructia blocului pot fi gasite in “extended entry” la sfarsitul postarii.
Va multumesc pentru ca ati citit despre aceasta constructie. Continuati sa cititi urmatoarele postari ce vor include o piesa foarte importanta si complicata: chiulasa.
George Bucsan
Worcester Polytechnic Institute
Aerospace Engineering, 2014
... ContinuedNot An Ordinary Tire
A little while ago I was asked by a fellow student about the best way to make a tire in SolidWorks, so I gave her some ideas on how to do it and went on with my day. Later
... ContinuedSTEM Education with Ten80, NASCAR(R), SolidWorks and Fun
Many students design cars – all types of cars, but how many teams design the actual sustainable power source? Student from the RC Lions team at R.L. Turner High (M.E.T.S.A) in Carrollton, TX presented the wind turbine they designed
... ContinuedW16 Engine: The First Animation
In this post about the W16 Engine I will create a partial assembly and make the parts presented thus far look and move like an engine. As usual, this build will be thoroughly detailed.
Download Block-Crankshaft-Pistons
See detailed explanations in the extended entry at the end of the post.
Thank you for reading about this build and stay tuned for the next post which will include the complex Camcase part.
George Bucsan
Worcester Polytechnic Institute
Aerospace Engineering, 2014
... Continued