Revolve
SOLIDWORKS xDesign Lesson 11: Sketch Based and Applied Features
Through the years of teaching SOLIDWORKS, I tell my students important basics. 1. Select the correct sketch plane. 2. Keep the Base sketch simple. 3. Use constraints (geometric relations) before dimensions. 4. Keep features simple. Similar basics apply with SOLIDWORKS xDesign.
... ContinuedAero Design Series – Stock Wheel – Part 3: Saving and Renaming
Welcome to the first in a line of Aero Design Video Series created by Matthew Gruber in collaboration with SOLIDWORKS and SolidXPerts! This first series is for beginners using SOLIDWORKS for the SAE Aero Design and Design/Build/Fly competitions. In this tutorial, we will learn focus on saving and renaming parts.
... ContinuedAero Design Series- Stock Wheel – Part 2: Front Plane Sketch and Revolve
Welcome to the #Aero Design Video Series created by Matthew Gruber! This is the second tutorial in the 10 part series where we will go from the initial mockup to a detailed front plane sketch and revolve feature.
... ContinuedAero Design Series – Stock Wheel – Part 1: Intro and Initial Mockup
In this case, we will be reproducing a wheel in SOLIDWORKS based on measurements of the actual part. This tutorial series will span the full design process, from initial mockup all the way to final details.
... ContinuedTraffic Cone
This week I decided to make a traffic cone. In my next post I will be making a mold that the cone could be made using. The basic construction was pretty simple, just using a revolve and a boss extrude.
... ContinuedPepper Grinder
The inspiration for this post came during dinner with my family. This project seemed to be fairly straight forward, however once I got going I realized that the bottom grinding mechanism was harder to figure out then I first thought.
... ContinuedHand Drill in SolidWorks
I found an antique hand drill lying around my house and I thought this would be a fun project. I used revolve features extensively, as well as the obvious gear mates, to create an accurate representation of this mechanism. I
... ContinuedDetergent Bottle in SolidWorks
In learning more about SolidWorks surfacing, I decided to complete a fun, but fairly common project. The bottle is not based on any known design in particular, and I was careful to draw the profile myself, and to use a
... Continued