\n<\/span><\/strong><\/span><\/p>\n
- \n
- \n
PDM Professional User and Groups Management for Windows Login<\/strong><\/span><\/h3>\n<\/li>\n
- \n
Best Practice for IF Functions in Equations<\/strong><\/span><\/h3>\n<\/li>\n
- \n
Why SHELL mesh calculates unexpected results?<\/strong><\/span><\/h3>\n<\/li>\n
- \n
Easy way to determine the source location of SOLIDWORKS\u00ae installation files<\/strong><\/span><\/h3>\n<\/li>\n
- \n
Working with SOLIDWORKS\u00ae Visualize Shadow Catcher<\/strong><\/span><\/h3>\n<\/li>\n<\/ol>\n
PDM Professional User and Groups Management for Windows Login<\/strong><\/h1>\n
By Gordon PURSEL<\/em><\/p>\n
This blog is for PDM Professional administrators interested in using Windows Login and importing groups from Active Directory (AD). If you are new to PDM Windows Login, I also recommend reviewing the SOLIDWORKS\u00ae PDM Administration Guide > Importing Active Directory Users into Groups (For SOLIDWORKS\u00ae PDM Professional only) and Knowledge Base Solution S-077650 for more details.<\/p>\n
To begin, if you are still trying to determine if Windows Login is best for your organization. Below are few time saving benefits to using Windows Login and Importing Groups from Active Directory.<\/p>\n
- \n
- The PDM \u2018Add Users\u2019 and \u2018Importing Groups from Active Directory\u2019 wizards automatically creates Users with PDM User Properties mapped to AD attributes such as login name, full name, email, etc. Automatically creating users and repurposing the AD attributes is a real time saver when creating a large number of users.<\/li>\n
- The PDM \u2018Add Users\u2019 and \u2018Importing Groups from Active Directory\u2019 wizards can optionally assign users to groups imported from Active Directory.<\/li>\n
- Passwords and policies are managed by Windows Active Directory.<\/li>\n
- User properties and group membership changed in AD can be updated in PDM via \u2018Update from Active Directory\u2026\u2019. This includes adding new users to PDM, adding users to imported groups, removing users from the imported group, and updating user properties.<\/li>\n<\/ul>\n
To configure SOLIDWORKS\u00ae PDM Archive Server for Windows Login :
\n<\/strong><\/p>\n- \n
- To use Windows Login, the SOLIDWORKS\u00ae PDM Archive Server login type must be set to Windows login. If the Archive Server is not replicated, the setting can be configured in the Default Settings > Login tab. Note:<\/strong> When users login into PDM they are prompted for their Windows authentication credentials. Using the sub-option \u2018Automatic login\u2019 logs in Windows users automatically without prompting for credentials.
\n
\n![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/1-111-615x437.png\")
<\/p>\n
\n<\/li>\n- The setting can also be configured in the vault specific Properties > Login tab.Tip:<\/strong> Consideration to set Windows Login in the Default Settings or vault specific settings depends if all vaults default to use the same Windows Login > Settings and allow creating the same users. For example, if you plan to have multiple vaults containing different Windows users, be sure to configure Windows Login at the vault specific properties.
\n
\n![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/2-106.png\")
<\/p>\n
\n<\/li>\n- On the Login tab > Windows Login > Settings add a group containing users who log into PDM
\n
\n![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/3-98-615x350.png\")
<\/p>\n
\nTip: Configuring the Windows Login > Settings is where we see common mistakes. Following these guidelines will improve active directory lookups during PDM login and synchronizing PDM user and groups imported from active directory and avoid PDM access to unintended users.<\/p>\n
- \n
- Create a Domain group containing \u2018only\u2019 PDM users then add that group. This is preferred even when planning to import AD groups.<\/li>\n
- Do not add default \u2018Doman Users\u2019 group.<\/li>\n
- Remove the Local Built-In users and groups<\/li>\n<\/ul>\n<\/li>\n<\/ol>\n
Creating Windows Users in SOLIDWORKS\u00ae PDM Administration Tool<\/strong><\/p>\n
- \n
- The PDM Admin can import Windows Users from the \u2018Users\u2019 or \u2018Groups\u2019 node. This first example shows the \u2018Add Users\u2019 dialog from the \u2018Users\u2019 node.
\n
\n![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/4-87-615x415.png\")
<\/p>\n
\n<\/li>\n - The \u2018New Windows User\u2019 can be used to list specified users from the Archive Server Tool > Windows Login > Settings.
\n
\n![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/5-79.png\")
<\/p>\n
\n<\/li>\n - \u2018List Windows Users\u2019 presents a list of users from the Archive Server Tool > Windows Login > Settings which are not already in the PDM vault. The \u2018Add to Groups\u2019 checkbox will add users to their appropriate imported AD groups.
\n
\n![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/6-55.png\")
<\/p>\n
\n<\/li>\n - The users created from either step will import User Properties from AD.
\n
\n![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/7-46-615x587.png\")
<\/p>\nTip: Use \u2018Active Directory Property Mapping\u2019 to override default user property mappings or map properties such as \u2018User data\u2019 that are not mapped to any Active Directory attribute<\/li>\n<\/ol>\n
![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/8-35-615x237.png\")
<\/p>\n
\nImporting Windows Groups from Active Directory<\/strong><\/p>\n
- \n
- To import AD Groups use \u2018Import from Active Directory\u2026\u2019 from the Groups node.
\n
\n![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/9-23-615x310.png\")
<\/p>\n
\n<\/li>\n - The next dialog presents a list of users from the AD Group. The Status column is used indicates if the user exists in PDM or if the new user will be created. Selecting the checkbox in the \u2018User\u2019 column either creates new users or adds existing users to the group.
\n
\n![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/10-21.png\")
<\/p>\n
\n<\/li>\n - At the end of the wizard, set the group permissions for the PDM vault
\n
\n![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/11-24-615x589.png\")
<\/li>\n<\/ol>\nBest Practice for IF Functions in SOLIDWORKS\u00ae Equations<\/strong><\/h1>\n
By Mahendra SAVITA<\/em><\/p>\n
When you use the IF<\/strong> function and assign a specific decimal value to the Global Variable<\/strong> or the value to compare with, you may get an unexpected result because of the floating-point math done by equations.<\/p>\n
SOLIDWORKS\u00ae uses floating-point math to compare values. For example, if you specify a Global Variable<\/strong> of 2.2, SOLIDWORKS might evaluate it as 2.2000001 or 2.1999998. In such cases, the comparison returns 0 (False) instead of 1 (True).<\/p>\n
![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/1-112-615x165.png\")
<\/p>\nTo avoid this situation, use a tolerance value in your comparison equation. In this example, you create a tolerance of 0.0000001.<\/p>\n
Under Value\/Equations<\/strong>, create the IF statement as follows:<\/p>\n
= IIF (“GV” – 2.2 <= “tolerance”, 1, 0)<\/strong><\/p>\n
In the comparison IF function, Test With Tolerance, the Global Variable GV minus itself is less than or equal to the tolerance, so the equation Evaluates to 1<\/strong>, the expected result.<\/p>\n
Note<\/strong> that the Test without Tolerance unexpectedly Evaluates to 0.<\/p>\n
Why SHELL mesh calculates unexpected results?<\/strong><\/h1>\n
By Suresh NIKALAJE<\/em><\/p>\n
SOLIDWORKS\u00ae Simulation Help description on the topic \u2018Shell Definition PropertyManager\u2019 summarizes: \u201cThe program does not offset load and boundary condition definitions applied on the selected surfaces. Apply all loads and boundary conditions at the selected surfaces where the shell mesh is created\u201d<\/em><\/p>\n
Hence, it is important to understand how exactly the load offset works in case of shell, and the applicable modeling technique to avoid generating unexpected results.<\/p>\n
To exemplify the outcome, consider a 100 mm long a plain carbon steel plate with base dimensions 20 mm X 4 mm under 100N tensile load. A static study defined to conduct four separate and identical tests using different modeling approaches as shown in the following images –<\/p>\n
![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/1-29-615x330.jpg\")
<\/p>\n- \n
- The first body, treated as SOLID, fixed at bottom end and tensile load applied on top face<\/li>\n
- The second body is treated as a BEAM, fixed at bottom joint and tensile load applied on top joint.<\/li>\n
- The third body uses the ‘Define Shell by Selected Faces’ option. There is a ‘Top Surface’ offset, bottom edge fixed and tensile load applied on top edge.<\/li>\n
- The fourth body also uses the ‘Define Shell by Selected Faces’ option defined using middle surface, bottom edge fixed and tensile load applied on top edge, mesh model as shown in the following images.<\/li>\n<\/ol>\n
![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/2-27-615x330.jpg\")
<\/p>\nAfter study is completed, post processing gives surprising displacement results. Here a tensile load (axial) in Y direction is the only dominant load; ideally, it would results only stretching of the plat. Therefore anticipated UX: X Displacement is 0 micron however in case of example III. SHELL (with offset) appears bending, and X Displacement detected is 0.044 micron, which is unexpected, as shown in the following images,<\/p>\n
![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/3-22-615x330.jpg\")
<\/p>\nThe third body uses the ‘Define Shell by Selected Faces’ option, with a ‘Top Surface’ offset, shows the bending effect, because:<\/p>\n
- \n
- The software does not offset the force. The software applies the force at the exact location of the edge that selected for the force.<\/li>\n
- The program offsets the midsurface with a distance equal to half the thickness of the shell<\/li>\n<\/ol>\n
Thus, a tensile force \/ compressive defined on a flat shell does not cause any bending if you apply the load in the same plane as the midsurface of the shell (this is always the case when there is no shell offset).<\/p>\n
Consequently, in this case, the load is not in the same plane as the midsurface of the shell. There is a half thickness offset of the force with respect to the midsurface of the shell. This creates a bending moment equal to the force value times half the thickness of the shell.<\/p>\n
It is not possible to offset the force. In this case, the solution to avoid causing bending in the shell is to edit the shell and not use any offset, for additional information refer KB S-078933.<\/p>\n
Easy way to determine the source location of SOLIDWORKS\u00ae installation files<\/strong><\/h1>\n
By Deepika PUJARI<\/em><\/p>\n
While diagnosing issues related to SOLIDWORKS\u00ae Installation, you may need to know the source file location. In such situation, browsing through many locations and folders may not be ideal. One of the practical and quick methods of finding the source file directory of a program is through the Control Panel menu. The Control Panel has more columns than it shows by default. Here is what you need to do:<\/p>\n
- \n
- Open the Control Panel and go to Programs.<\/li>\n
- Click \u2018Uninstall a program\u2019. This will take you to the list of installed apps.<\/li>\n
- Right-click the title of any one of the columns and from the context menu, select \u2018More\u2019.
\n
\n![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/1.0png-615x169.png\")
<\/p>\n
\n<\/li>\n - \u2018Choose Details\u2019 dialog box will appear listing the various columns you can enable. One of them is \u2018Source\u2019 and if you enable it, you will be able to view the folder location the application is installed from.<\/li>\n<\/ol>\n
![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/1-113.png\")
<\/p>\nThe \u2018Source\u2019 column will show you the location of Install files for most of the applications.<\/p>\n
![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/2-107-615x250.png\")
<\/p>\nThe information in this column is helpful when diagnosing SOLIDWORKS\u00ae installation errors like for example 1706, which is: \u2018The Installation Manager cannot find required source files for product SOLIDWORKS\u00ae [version and service pack]\u2019.<\/p>\n
Working with SOLIDWORKS\u00ae Visualize Shadow Catcher<\/strong><\/h1>\n
By Richie MORE<\/em><\/p>\n
SOLIDWORKS\u00ae Visualize allows you to create stunning photo-realistic images and videos with the existing design CAD data.<\/p>\n
To achieve a Realistic render, requires precisely placing the object shadows as per the preferred environment. We can have a control over the shadow placement with Shadow Catcher.<\/p>\n
Procedure to work with Visualize Shadow catcher<\/strong><\/p>\n
Step 1<\/strong>– Open a Visualize Project. Add a background image as BackPlate. Match the CAD model to the BackPlate.<\/p>\n
![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/1-114-615x478.png\")
<\/p>\nStep 2<\/strong>– Notice, the shadow does not correctly display near the walls. The shadow must fall on the wall, and not pass linearly as if the wall does not exist.<\/p>\n
![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/2-108.png\")
<\/p>\nStep 3<\/strong>– From the Model tab > Add Wall primitive, and align it to the image wall.<\/p>\n
![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/3-99-615x480.png\")
<\/p>\nStep 4<\/strong>– Enable \u201c Shadow Catcher \u201c.<\/p>\n
![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/4-88.png\")
<\/p>\nStep 5<\/strong>– Now the shadow is correctly places over the wall as in the BackPlate image.<\/p>\n
![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/5-80-615x481.png\")
<\/p>\nNoteworthy Solutions from the SOLIDWORKS\u00ae Knowledge Base<\/strong><\/h1>\n
![\"icon](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/Screen-capture3.png\")
<\/b>When I right-click a part, drawing or assembly file, why does the SOLIDWORKS\u00ae\u00a0 file utility label not appear?<\/strong>This problem could happen after a Windows\u00ae or SOLIDWORKS\u00ae update. To get more information, see solution ID: S-079838<\/a><\/p>\n![\"Icon](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/Screen-capture1.png\")
<\/b>When I use the SOLIDWORKS\u00ae PDM quick search or integrated search functionality, why do the SOLIDWORKS file open or save dialog boxes stop responding (hangs or crashes)?<\/strong>This problem can happen on a SOLIDWORKS\u00ae PDM client workstation if the file type associations for SOLIDWORKS files are incorrect. To get more information, see solution ID: S-079778<\/a><\/p>\n![\"\"](\"https:\/\/blog-assets.solidworks.com\/uploads\/sites\/4\/simulation-9.png\")
What can I do if every SOLIDWORKS\u00ae Flow Simulation project I run shows a \u2018Preparing model\u2019 Solver Monitor status indefinitely and any FloXpress analysis never finishes the \u2018Meshing in progress\u2019 step?<\/strong>To get more information, see solution ID: S-079776<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"Hello to all, Welcome to the new edition of the SOLIDWORKS\u00ae Support Monthly News! This monthly news blog is co-authored by members of the SOLIDWORKS\u00ae Technical Support teams worldwide. Here is the list of topics covered in this month’s Blog<\/p>\n... Continued<\/a>","protected":false},"author":625,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[21,2798,30,497,35],"tags":[874,291,889],"class_list":["post-31835","post","type-post","status-publish","format-standard","hentry","category-solidworks","category-solidworks-pdm","category-solidworks-simulation","category-solidworks-support-monthly-news","category-tips-tricks","tag-pdm","tag-simulation","tag-solidworks"],"acf":[],"_links":{"self":[{"href":"https:\/\/blogs.solidworks.com\/tech\/wp-json\/wp\/v2\/posts\/31835","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/blogs.solidworks.com\/tech\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/blogs.solidworks.com\/tech\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/blogs.solidworks.com\/tech\/wp-json\/wp\/v2\/users\/625"}],"replies":[{"embeddable":true,"href":"https:\/\/blogs.solidworks.com\/tech\/wp-json\/wp\/v2\/comments?post=31835"}],"version-history":[{"count":28,"href":"https:\/\/blogs.solidworks.com\/tech\/wp-json\/wp\/v2\/posts\/31835\/revisions"}],"predecessor-version":[{"id":32336,"href":"https:\/\/blogs.solidworks.com\/tech\/wp-json\/wp\/v2\/posts\/31835\/revisions\/32336"}],"wp:attachment":[{"href":"https:\/\/blogs.solidworks.com\/tech\/wp-json\/wp\/v2\/media?parent=31835"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/blogs.solidworks.com\/tech\/wp-json\/wp\/v2\/categories?post=31835"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/blogs.solidworks.com\/tech\/wp-json\/wp\/v2\/tags?post=31835"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
- To import AD Groups use \u2018Import from Active Directory\u2026\u2019 from the Groups node.
- The PDM Admin can import Windows Users from the \u2018Users\u2019 or \u2018Groups\u2019 node. This first example shows the \u2018Add Users\u2019 dialog from the \u2018Users\u2019 node.
- The setting can also be configured in the vault specific Properties > Login tab.Tip:<\/strong> Consideration to set Windows Login in the Default Settings or vault specific settings depends if all vaults default to use the same Windows Login > Settings and allow creating the same users. For example, if you plan to have multiple vaults containing different Windows users, be sure to configure Windows Login at the vault specific properties.
- To use Windows Login, the SOLIDWORKS\u00ae PDM Archive Server login type must be set to Windows login. If the Archive Server is not replicated, the setting can be configured in the Default Settings > Login tab. Note:<\/strong> When users login into PDM they are prompted for their Windows authentication credentials. Using the sub-option \u2018Automatic login\u2019 logs in Windows users automatically without prompting for credentials.
- \n