Gear Mate
Mechanical Ice Cream Scoop in SolidWorks
I came across this ice cream scoop in my kitchen and couldn't resist modelling it. It is complete except for the torsion spring that adds tension to the lever. I did not model the spring because I did not want
... ContinuedHand Drill in SolidWorks
I found an antique hand drill lying around my house and I thought this would be a fun project. I used revolve features extensively, as well as the obvious gear mates, to create an accurate representation of this mechanism. I
... ContinuedCan Opener
For this post I decided to make something that we all have used at least once; a can opener. There is a gear mate on the gears but if you want to have the handle move you will need
... ContinuedReel Mower
This is a reel mower that I made. Take a look at the gearing on the wheels. The gear ratio is 1:3 which means that for every one rotation of the wheel the blades spins three times. I used a
... ContinuedComplete Telecaster Guitar Neck in SolidWorks
This is the completed neck to the guitar. The mounting of the fret wire was by far the most difficult part, and it is still not perfect. The entire assembly is posted below, with all of its parts. I am
... Continued