Music
SOLIDWORKS Entrepreneur: DS 3DEXPERIENCE Lab Supports Innovators
The Dassault Systemes 3DEXPERIENCE Lab Boston, located in the North American Headquarters at Waltham, MA, has two components – a Startup Accelerator and a Fab Lab. The Accelerator works with early to mid-stage startups that focus on new technologies and
... ContinuedTuning Fork Optimization
Starting Model Optimized Model For this post, I decided to create a tuning fork. To figure out what pitch it was I created a frequency simulation study to determine the resonant frequency of the tuning fork. I added a fixed portion
... ContinuedCollapsible Music Stand in SolidWorks
This assembly was a lot of fun to create. I used design tables to vary parameters on the struts and the rivets. This saves time and file size, as the same parts can be used several times in different configurations.
... ContinuedCompleted Telecaster Guitar in SolidWorks
It’s finally done! This is the completed Telecaster model. The electrical components are modeled vaguely, if at all, as they are very complex. However, every other aspect of the guitar is modeled as accurately as possible. This has been a
... ContinuedComplete Telecaster Guitar Neck in SolidWorks
This is the completed neck to the guitar. The mounting of the fret wire was by far the most difficult part, and it is still not perfect. The entire assembly is posted below, with all of its parts. I am
... ContinuedFinal Trumpet Assembly
Here is my final trumpet assembly. I got the valves to match up and move like they should be able to. However, I could not figure out how to compress the springs as they would in real life. There
... ContinuedMain Trumpet Body With Slides
For this post I have added the tuning slides as well as a mouth piece to the main trumpet body. I did make some changes to main trumpet body in the process. Up next are the three valves; this
... ContinuedTelecaster Guitar Neck in SolidWorks
This is the neck to the guitar. I also re-uploaded the body, as I changed the size of the neck mounting holes. Now this is starting to look more like a guitar! I wonder how I’m going to put
... ContinuedMain Trumpet Body in Solidworks
I am a trumpet player and have always wanted to make a model of my horn. This is the first part that will eventually make up my entire trumpet in detail. Please continue to follow my process as I
... ContinuedTelecaster Guitar Body in SolidWorks
Here is a model of the body of one of my favorite guitars. This is the most logical way to start modeling the guitar, and I hope you will follow my posts and enjoy my future models. Thanks for
... Continued