{"id":47946,"date":"2021-12-06T08:00:46","date_gmt":"2021-12-06T13:00:46","guid":{"rendered":"https:\/\/blogs.solidworks.com\/solidworksblog\/?p=47946"},"modified":"2021-12-03T14:42:02","modified_gmt":"2021-12-03T19:42:02","slug":"part-four-creating-the-next-belly-racer-with-solidworks","status":"publish","type":"post","link":"https:\/\/blogs.solidworks.com\/solidworksblog\/2021\/12\/part-four-creating-the-next-belly-racer-with-solidworks.html","title":{"rendered":"Part Four – Creating the Next Belly Racer with SOLIDWORKS"},"content":{"rendered":"

Welcome to the \u201cCreating a Belly Racer with SOLIDWORKS\u201d blog series. If you need to catch up, you can start with the first one\u00a0here<\/strong><\/a>.<\/p>\n

Well, summer is over so it\u2019s time to put my blogger’s hat back on and get everyone caught up with the latest Belly Racer developments. I didn\u2019t take the summer off from working on the Belly Racer and continued to design the chassis and roll cage structure.<\/p>\n

In the last blog<\/a> the design of the chassis was discussed in detail and in this blog I\u2019ll go into more detail on how the chassis and roll cage structure will integrate.<\/p>\n

The chassis of a race car has many important and critical functions to perform. It provides the mounting for the engine and driveline and ancillary components, the mounting for the suspension, the mounting of body and many other functions. The most critical function the chassis has is protecting the driver with an integrated roll cage. The roll cage protects the driver from being injured in a high-speed incident by surrounding the driver with a high-strength structure.<\/p>\n

There have been many advancements is race car engineering and design related to driver safety. For instance both IndyCar and Formula 1 racing have adopted the \u201cHalo\u201d which is a mini roll cage designed to protect the driver during a roll over or from a collision with another car. Here\u2019s a look at a NASCAR chassis with the integrated roll cage surrounding the driver\u2019s area. Consider a NASCAR race car weighs 3,600lbs and is capable of going 200+mph. This structure is capable of protecting the driver when things go wrong, allowing the driver to walk away from a tremendous crash.<\/p>\n

<\/p>\n

The F1 \u201cHalo\u201d on the left and the IndyCar Aeroscreen on the right. Indycar added the \u201cwindshield\u201d because a driver was fatally injured when a part from another car hit the driver in the helmet.<\/p>\n

<\/p>\n

Roll cages \u00a0and chassis are constructed of steel tubing usually 1.5\u201d to 1.75\u201d in diameter with a .090\u201d to .125 or greater wall thickness. Its either TIG or MIG welded together depending on what type of steel is used. Some roll cages are made from 4130 chrome-moly steel which requires TIG welding and some are made of DOM or drawn over mandrill mild steel which can be MIG welded. The overall weight of the car influences the size of the structural members. F1 and IndyCAR race cars are manufactured out of carbon fiber composites and use very little metal in the chassis.<\/p>\n

Since the Belly Racer starts out using a surplus aircraft fuel tank there\u2019s not much room to construct a full-fledged roll cage so a roll bar will be utilized with a modified roll cage to protect the driver. The material will be DOM mild steel which is easy to bend using the correct tube bender and can be welded using a MIG welder. The roll bar and cage will serve another purpose; it will strengthen the chassis between the front and rear suspensions and minimize any flexing. Here\u2019s what the Belly Racer chassis looks like with the roll bar and cage.<\/p>\n

<\/p>\n

Another function the roll cage performs is mounting the driver\u2019s seat and five point safety harness. Both the seat and harness need to be mounted to the roll cage and not the chassis to eliminate relative motion between the two structures. Also the harness cannot be attached to the seat. You always want the driver to move with the roll cage and not the chassis in an incident the keep the driver protected.<\/p>\n

The reason it\u2019s called a five point harness is the attachment points for the harness. There are two belts that go over the shoulders, two for the belts across the hips and one for the antisubmarine or crotch belt as shown here:<\/p>\n

<\/p>\n

This isn\u2019t the only safety device the driver will be using. Obviously the driver will be wearing a helmet with a HANS device. The Head And Neck Support (HANS) device keeps the drivers head from whipping if a sudden stop occurs in either a forward, backward or sideways motion. It was developed after a number of drivers died from basilar skull fractures in relatively minor accidents where the car crashed into an object and the driver was killed because of the sudden stop. Keep in mind the driver\u2019s body is going the same speed as the car when the object was hit. The five-point harness keeps the drivers body in place but the drivers head continues to move at speed causing a fatal injury.\u00a0 HANS devices are now mandatory equipment in all sanctioned racing series worldwide.<\/p>\n

Here\u2019s what a HANS device looks like. The device is held in place by the shoulder straps and attached to the driver\u2019s helmet as shown on the left in the image below. The image on the right shows what happens without the HANS device. Here\u2019s a good article<\/a> in Car and Driver to read about the development of the HANS device.<\/p>\n

<\/p>\n

There\u2019s a lot to consider when designing a race car even as simple as the Belly Racer. The number ONE objective and not to be compromised when designing a race is driver safety. We always used extra caution when designing and building the race cars I\u2019ve been involved with. The sport is dangerous yes but, the cars don\u2019t have to be.<\/p>\n

Next steps are to perform some structural analysis and maybe even some dynamics analysis to see what happens when the Belly racer is being driven over a bumpy track.<\/p>\n","protected":false},"excerpt":{"rendered":"

Here’s an update from the SOLIDWORKS resident “car guy” Mike Sabocheck on the Belly Racer project.<\/p>\n... Continued<\/a>","protected":false},"author":194,"featured_media":47941,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[3,26,826,14,18],"tags":[3480,129,3651,3652,3655],"class_list":["post-47946","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-community","category-customer-stories","category-dassault-systmes","category-design","category-solidworks","tag-belly-racer","tag-design-2","tag-hans-device","tag-head","tag-steel-frame"],"acf":[],"_links":{"self":[{"href":"https:\/\/blogs.solidworks.com\/solidworksblog\/wp-json\/wp\/v2\/posts\/47946","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/blogs.solidworks.com\/solidworksblog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/blogs.solidworks.com\/solidworksblog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/blogs.solidworks.com\/solidworksblog\/wp-json\/wp\/v2\/users\/194"}],"replies":[{"embeddable":true,"href":"https:\/\/blogs.solidworks.com\/solidworksblog\/wp-json\/wp\/v2\/comments?post=47946"}],"version-history":[{"count":4,"href":"https:\/\/blogs.solidworks.com\/solidworksblog\/wp-json\/wp\/v2\/posts\/47946\/revisions"}],"predecessor-version":[{"id":48441,"href":"https:\/\/blogs.solidworks.com\/solidworksblog\/wp-json\/wp\/v2\/posts\/47946\/revisions\/48441"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/blogs.solidworks.com\/solidworksblog\/wp-json\/wp\/v2\/media\/47941"}],"wp:attachment":[{"href":"https:\/\/blogs.solidworks.com\/solidworksblog\/wp-json\/wp\/v2\/media?parent=47946"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/blogs.solidworks.com\/solidworksblog\/wp-json\/wp\/v2\/categories?post=47946"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/blogs.solidworks.com\/solidworksblog\/wp-json\/wp\/v2\/tags?post=47946"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}